Industrial Axial Fan Manufacturers

Axial Fan Range from Beron Motor

As an Axial Fan manufacturer, we design and build axial fans for high-volume air movement in equipment, plant ventilation and thermal management systems. Our range covers AC Axial Fan, EC Axial Fan and DC Axial Fan families, with impeller diameters from compact electronic-cooling sizes up to large industrial 800 mm machines.

Axial fans deliver high airflow at low to moderate static pressure. They are the first choice when the main job is moving large volumes of air through relatively open paths, such as condenser cooling, heat exchanger airflow, enclosure ventilation, fresh-air intake, exhaust and general factory air movement.

At Hangzhou Beron Motor Co., Ltd., we combine motor development, impeller design and control electronics under one roof. With 16 years of fan and micro-special motor experience, R&D and manufacturing centers in Hangzhou and Huzhou, and an annual output of 60,000 units, we supply both standard axial fans and customized solutions for OEM and project business.

The Axial Fan Families We Supply

The three families share the same axial aerodynamic principle, but differ in drive electronics, control behavior and ideal application. This determines how you wire the fan, how you modulate airflow and how energy-efficient the assembly becomes at partial load.

Engineering, Materials and Configuration

Within these families, we configure the impeller, housing, guard, motor and electrical termination around the actual application. Product options include compact 200 mm square-panel fans for equipment cooling, 400 mm external-rotor fans for chillers and cold stores, 450 mm tubular pipe-mounted fans and 800 mm industrial axial fans with protective grills.

• Impellers: five-blade aluminum-alloy and seven-blade metal designs, selected to balance airflow, noise and rigidity.
• Housings: square panel-mount frames, tubular or cylindrical bodies for duct installation, and wall- or equipment-mount configurations.
• Protection: mesh guards, protective grills and cable or terminal arrangements matched to installation and safety requirements.
• Motors: external rotor motors in AC and EC versions; brushless DC motors in low-voltage versions; ball bearings for long service life.

Air temperature, humidity, altitude and corrosive agents are important selection inputs. For condenser and cold-storage duty, we match the blade material, coating and bearing specification to the operating environment. For electronics enclosures, noise and low local heat generation are often more critical than peak airflow.

Controls and Automation Integration

Control strategy is part of the quotation, not an afterthought.

• AC fans connect directly to the mains supply and are selected where simplicity and fixed-speed operation are priorities. External speed controllers can be added where permitted by the motor specification.
• EC fans include an integrated drive, accept PWM or 0-10 V control signals, and operate from a wide voltage range. Optional Modbus RTU provides networked speed control and fault indication.
• DC fans run from low-voltage supplies and provide convenient speed adjustment for electronic equipment where the system already has a 24 V or 48 V bus.

When we quote EC or DC fans, we confirm the control signal type, logic direction and interface voltage so the fan matches your PLC, thermostat or building management system.

Quality Assurance and Performance Verification

Quality management is based on ISO 9001:2015, and our R&D centers are equipped with wind tunnel, noise, motor performance and aging laboratories. We use those facilities to verify airflow performance, sound data, power consumption and endurance before series production.

• CCC, CE and UL evidence is maintained, with RoHS and IP55 test coverage on relevant models.
• During production we conduct process inspection covering appearance, nameplates, assembly integrity, accessories and packaging.
• We support factory acceptance testing and third-party inspection, and we review inspection records and shipping documents before release.

Project Support, Installation and After-Sales

Project involvement starts before the order. We analyse the operating condition, select an appropriate fan curve, define mounting and electrical interfaces, and provide the technical documentation needed for integration. Customized requirements such as non-standard voltage, power rating, speed, fitting dimensions, lead exits and special-duty protection are handled as OEM/ODM projects.

After delivery, we supply installation instructions and technical documentation, provide online guidance for commissioning and operation, and support spare parts and service inquiries. For larger orders, on-site technical visits can be arranged under separate terms.

Logistics and compliance are coordinated by our team, including export packaging, certification coordination and shipping terms such as FOB, DAP or DDP. For standard products, samples are typically shipped in 3-5 days and regular production normally takes 25-30 days, depending on quantity and configuration.

Information We Use to Configure Your Solution

Axial Fan FAQs